Using our years of experience and with the support of our diligent team of professionals, we are instrumental in providing quality assured assortment of Pouch Burst Tester.
We manufacture Melt Flow Index Apparatus. Melt Fow of Thermoplastic material is defined as the rate of flow in grams per ten minutes of extrudate of molten resins through a jet of a specified length and diameter under prescribed conditions of temperature, load & piston position in a cylindrical cavity inside a heated metallic tube barrel at the measurement is being made.
The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the pid controller, digital preset timer at other electronic components.
Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipments.
Asian Toxicity Chamber consists of an airtight enclosure of about 0. 7m³ volume lined with opaque plastic sheeting having a hinged, fitted with a transparent plastic panel. Some gaseous products of combustion may react with or be absorbed on the walls of the chamber. So the inner wall has the lining of polypropylene and with polycarbonate transparency window is provided. The chamber is fitted with a vacuum pump forced air extraction system, which can be closed at the exit from the chamber when required.
The chamber is fitted with sampling positions such that the air tightness of the chamber is not impaired. The chamber is containing a mixing axial fan inside the chamber at horizontally and centrally inside the chamber at roof level to ensure rapid mixing of combustion products capable of being switched on and off externally.
Burner is to be capable of achieving a flame approximately 100 mm in height. The burner is fitted at the center of the chamber. There is a provision is to be made for igniting and extinguishing the burner from out side the chamber.
A digital temperature indicator is also mounted for the measurement of temperature of the flame of the burner. The specimen support is an annulus cut from a sheet steel nominal thickness 2 mm of approximately 100 mm overall diameter with a 75 mm diameter hole carrying temperature resistance wires approximately 10 mm apart to form a lattice.
The complete assembly is equipped with a non-combustible side support arm to give a tennis racket appearance. This sample holder assembly has the provision of sliding of sample without the leakage of the chamber.
There are two flow meters are fitted to the instrument to fine control of the supply of natural gas and air. All the parts are either polished or painted to give the corrosion resistance long life. Gas detection tubes and its pumps are optional which will be supplied at separate order as per customer requirement.
· N. C. D. 1409: determination of toxicity index.
We are a paramount organization that is engaged in manufacturing, supplying and exporting a broad spectrum of Smoke Density Testers. Our product-line is manufactured at our multifaceted manufacturing facility employing advanced technology and latest machines. These products are widely used for testing the burning combustion of plastics. In compliance with international quality standards, these testers are appreciated by customers for their longer functional life, excellent performance and easy operations.
Our organization specializes in manufacturing, supplying and exporting a qualitative assortment of Smoke Visibility Testers. Manufactured utilizing optimum-grade material, these products are helpful measuring smoke visibility. These durable and easy to use products are in tandem with the international quality standards. Customers can avail our quality-approved product-line in various specifications at their premises within the postulated time-frame.
The “ASIAN” Environmental Stress Cracking Apparatus (ESCR) is designed to test for cracking due to environment stresses on Electric Polyethylene insulation or sheath of cable.
The apparatus consists of:
Cutting Die made of high carbon steel duly hardened and ground to cut sample of specified size.
A nicking jig and blade for making notch of specified size.
A sample holder made of brass of specified size.
A hard glass tube of 32 mm OD and 200 mm length with cork and aluminum foil.
A bending clamps assembly for bending 10 samples at a time.
A transfer tool assembly for transferring the bent specimen to the specimen holder.
Digital temperature control water bath.
A press (handy).
The cutting die and blades are hardened and sharpened to give long life to the same. All the components of jig clamp and tool are made of mild steel and are bright chrome plated to give a corrosion resistant finish.
Tensile Testing Machine for Plastic Testing
Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
Tensile test machine is widely used in controlling the quality; Rubber & Plastics; metallurgical iron and steel; manufacturing machinery; electronic equipment; automobile production; textile fiber; wire and cable; packaging materials and foodstuffs; instrumentation; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research Laboratory; inspection arbitration, technical supervision departments; building materials, ceramic; petroleum & chemical; other industries.
|Power:||Servo||Type:||Universal Tensile Testing Machine|
|Sensor:||Celtron Load Cell||Capacity:||500, 1000, 2000,kg|
The Asian Dart Impact Tester consists of the following parts:
The “Asian” Top Load Tester for plastic bottle made of a set of grips. The grips have a inner taper, which provide the automatically center of the bottle under testing, the lower grip is attached to the spring balance which have the maximum range needle, the lower grip is fixed to the base of the tester. The lower grip, which is attached to the spring balance, is move up and down with the help of worm reduction gearbox, and a hand wheel. The warm reduction gearbox provides small effort at maximum load on the bottle.
All parts of the instrument is metallic paint and bright chrome/ zinc plating to give the corrosion free long life.
Digital; cum motorized models are also available.
The “ASIAN” Digital Thickness Gauge for fabric consists of a dial micrometer fitted on a digital micrometer fitted on a rigid metallic frame .the micrometer has a flat circular indenter, Which exerts the specified pressure on the fabric sample whose thickness is being measured through a dead weight .the fabric sample is kept on an anvil, which is in from of a flat circular platform. The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the fabric sample with the help of a lifting lever.
Range available 5,10,25 and 50 mm
least count 0.1 mm, 0.01 mm, 0.002 mm and 0.001 mm available