Geosynthetic Testing Equipment

Product Details:

Used for Water Flow Rate Test of geotextile.as per ASTM D4469 

‘Asian Permittivity (Water Flow Rate) Tester’ is designed to determine the permittivity of geotextile. It is made of a rigid S.S base plate. A water inlet pipe is used for filling water and fix the sample. manometer tube used for setting pressure head between the lower side of sample and upper side of sample. A PVC pipe is used for maintain the water level according to standard. Some accessories are used with this equipment as stopwatch, temperature indicator, measuring cylinder 500ml, 50mm length gauge etc. The instrument may be used for constant head of water and also used in falling head method. This equipment is not required of electricity Equipment painted with powder coated paint for give a corrosion resistant finish surface and give an attractive look.

Technical Details:
• Uses Deaired Water (≤ 6 Ppm Dissolved Oxygen)
• Measures Flow Rate/Unit Area
• Constant Head Of 50 Mm (2.0 In.)
• Results In Permittivity, Ψ = (K)(T)
• Value Must Be ≥ 0.02 Sec-1

 

Additional Information:

• Delivery Time: 30 Days

Product Details:

Asian In-plane Water Flow Rate Tester for Geosynthetics is applied to determine the in-plane water flow rate of geotextile or geotextile-related product under varying normal compressive stresses and standard hydraulic gradient using a constant head.

Technical Data : 1. Geosynthetics specimen size : 350 X 350mm (LXW)2. Specimen thickness range: 1-50mm3. Stainless steel (SS) loading plate: 350 X 350mm4. Contact materials (top & bottom): Soft (Rubber) & Rigid (Acrylic), Size(350X350mm)5. Thickness of contact materials: 5, 10, 15, 20 & 25mm (5sets of Rubber & Acrylic) (one acrylic and one rubber)6. Normal compressive pressure: 10-600kPa Constant @0.1kPa accuracy7. Compressive pressure monitoring: Digital8. Water pressure monitoring : Digital transducer (Up & Down stream water difference) Unit Selection: kPa, kg/cm2 & bar9. Hydraulic gradient : Adjustable 10. Inlet water head difference : 0-500 mm11. Water tank capacity: 200 litre (Inlet & Outlet) Water management system: Recirculation through pump12. Manometers: Inlet, outlet & specimen holder (both sides) SS Calibration block: Open channel steel calibration block -1 No13. All steel items: Corrosion resistance SS grade 304/31614. All Pipes & valves: High strength UPVC

RELATED STANDARDBIS 17179:2019, ISO 12958:2020, ASTM D4716

Additional Information:

• Delivery Time: 35 Days
• Packaging Details: Wooden Packing

Product Details:

The Asian Hydrostatic pressure head tester for geomembrane made on a stainless base plate.There are two parts of instrument one is sample holding arrangement and the other is control panel for pressure control and timing device.The sample holding arrangement have, sample resting block, slotted plate, cover plate with observation windows and sample tightening arrangement with leak tight manner from its periphery. There is rubber gasket used for leak proof clamping of the sample.The sample holding arrangement made of stainless steel. The sample resting block have the provision of water holding well and air inlet port.The other part of the instrument is control panel which have pressure gauge with pressure regulator. There is an air inlet nozzle fitted with the control panel. The digital timer have the facility to on the buzzer at preset time.TECHNICAL DATA• Pressure gauge range: 10 Bar• Pressure regulator: 0 to 10 bar• Timer:0 to 999 hours, preset digital timerRELATED STANDARDIS: 15909

Additional Information:

• Delivery Time: 20 days
• Packaging Details: Wooden Box

Product Details:

The VERTICAL FLAMMABILITY TESTER for Automotive Vehicle is used for the purposes of determining the flammability of Geotextile products under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of materials when subjected to other sources of ignition.The apparatus shall consist ofA)     Specimen holderB)      BurnerC)      Template andD)     Flame gauge andE)      Chamber As Per : IS 15061 Annex B

Additional Information:

• Delivery Time: 15 days

Product Details:

The ASIAN Bursting Strength Tester is designed to find bursting strength of Geotextile, fabric/ leather/ paper/paper board & corrugated box. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The clamping is done by hand wheel/screw arrangement or by pneumatic pressure with pressure gauge, solenoid valve and pressure regulator as per model. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.

 TECHNICAL DATA

· Make: Asian

· Model No.: ATE/D-BST/GEO

· Maximum capacity: 6000kPa

· Rate of fluid displacement: 10-150 ml/min.

· Electric motor: Servo/Stepper motor for constant rate of pumping

· Pressure resolution: 0.1kPa

· Test area: 7.3cm2, 10cm2, 50cm2 & 100cm2

· Height of Burst: Up to 70mm

· Rubber diaphragm thickness: up to 2mm and highly expansive.

·   Calibration certificates: NABL accredited lab

STANDARD ACCESSORIES

· Rubber Diaphragm (lot of 3)

· Aluminum Foil (For Calibration Checking)

·       Glycerin 200ml

 

RELATED STANDARD 

 

BIS 1966-1:2022, ISO 13938-1:2019, ASTM D3786

Additional Information:

• Delivery Time: 20 Days
• Packaging Details: Wooden Packing

Product Details:

Asian Aperture Stability Modulus Tester of Geogrids is measuring the Aperture Stability Modulus of a Geogrids.“Secant Aperture Stability Modulus,” “Torsional Rigidity Modulus,” “In-plane Shear Modulus,” “Torsional StiffnessModulus” This test is intended to determine the in-plane stability of a geogrid by clamping a center node andmeasuring the stiffness over an area of the geogrid. This test is intended to provide characteristic properties fordesign. The test method was developed for pavement and sub grade improvement calibrated design methodsrequiring input of aperture stability modulusIS : ASTM D 7867/7864 M-15 Geogrids Stability

Additional Information:

• Delivery Time: 30 days

Product Details:

The “ASIAN” Humidity Chamber made of cubical shape, the inner body of the chamber made of Stainless Steel, there is a Stainless Steel water tank provided with the instrument, which is connected to the main instrument by a pipe provided with the instrument. At the bottom of the chamber, there is boiler is fitted for making Humidity. There are two wire mesh tray are also fitted to the chamber, the tray are removable, the test specimen are hold by the trays. There is a hinged door on the front of the instrument; a glass window is fitted to the hinged door.

Technical Specification:Inner chamber Size: 18 X 18 X 18 (Inch)Humidity Range: 50% to 95%Temperature range: 20°C to 70°CLeast count: 1°CAccuracy: ±2°Cchamber: Stainless steel
Power required: Single phase 230 VAC

For 27ºC Temperature & 65 % Relative Humidity

Additional Information:

• Delivery Time: 10 days

Product Details:

The Asian Static puncture resistance tester for PVC membranes made on two parts. The one part is puncturing arrangement and the other is observation part. The puncturing arrangement have, Guide rail, loading rod, loading discs, puncturing tool and concrete support.The observation part is made of vacuum pump with pressure regulator and manometer, metallic support, air permeable sheet, glass plate, transparent plastic tube. The plastic tube is paste to the glass plate. There is a metallic ring, one side of the ring fitted to the glass plate while other side have the rubber gasket. The is an vacuum nozzle fitted to the metallic ring for vacuum generation. All the parts are either Bright chrome platted or powder coated to give it corrosion resistant long life.TECHNICAL DATA• Hardness of puncturing tool : 50 HRC• Puncturing tool ball diameter :10 mm• Weight of loading rod : 2 kg• Ring weight : 3 kg-1piece• 5 kg-3 pieces• Vacuum gauge: digital type RELATED STANDARDIS:15909

Additional Information:

• Delivery Time: 20 Days
• Packaging Details: Wooden Packing

Product Details:

Asian Dynamic Perforation Tester / Dynamic Puncture tester is used for testing of geotextile material, • Make: Asian • Model No.: ATE/DPT/GEO TECHNICAL DATA • Clamp inner diameter: Ф150±0.5mm • Testing height: 500±2mm • Stainless cone: cone angle 45° 1000±5g • Measuring cone: cone angle 45°, 600±5g • Overall size: 440×580×1600 mm(L×W×H) • Net weight: 50Kg STANDARDS ACCESSORIES 1. Shock Stainless Steel Cone 2. Measuring Cone

Additional Information:

• Delivery Time: 20 Days

Product Details:

The “ASIAN” Universal Testing Machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.Capacity : 5 Ton

Additional Information:

• Delivery Time: 25-30 Days

Product Details:

 A sieve shaker is an essential piece of equipment used in laboratories to separate and grade granular materials. A Gyratory type sieve shaker is a machine that is widely used in industries such as pharmaceuticals, chemical, food, and agricultural processing, and research institutions. COMPANY MANY CHANGE ITEM DESIGN AND PACKING FOR TIME TO TIME. Colour may be change as per stock 

Additional Information:

• Production Capacity: 100

Product Details:

GEOTEXTILE ABRASION RESISTANCE TESTER

·         Make: Asian

·         Model No.: ATE/ART/GEO

 TECHNICAL DATA

·         Referring Standard: BIS 14714, ISO 13427, ASTM  D4886

·         Effective abrasion area: 75mm X 200 mm

·         Speed of reciprocating plate : 10 to 115 CPM, adjustable

·         Storke length: 25 mm
· Load: 1kg/6 kg, Variable

Additional Information:

• Delivery Time: 25 Days