|. Power supply: 380V three phases,||50Hz.|
|Dimensions||65 x 45 x 40 cm|
|Sand wheel rotating speed:||2800 rpm|
The “ASIAN” Digital Universal Testing Machine provide a relatively inexpensive way for determining the Tensile, compression, shear strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, (or place on the compression plate) while the other end is made to move at a known fixed speed with the help of motor, two gear boxes and duel screws arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, stop the machine when the sample is break and auto calibration. The load directly indicated in kilograms or Newton.
The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.
In two speed Changing the belt in one or more sets of V pulley can change the speed of traverse of the lower grip while the variable speed model speed is vary by a knob fixed on the panel and the speed also indicated on the panel. Different model have speeds suitable for testing different materials. An arrangement for moving the lower grip manually is also provided.
The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.
The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical, which include micro-switches, Push buttons, and contractors for safe and convenient operation