Fabric Testing Equipment

Product Details:

Determination of effect of ageing on various physical properties of different materials may be carried out by heating the material under test inside an air oven so that the effects of long term ageing are reproduced within a much shorter duration of time .for this determination, physical properties of the material under test are determined before ageing and ageing the test specimen at the specified temperature for a set duration of time and subsequent to the room temperature before conducting the tests again.

Determination of various physical characteristics of different materials and products at elevated temperature may be carried out by heating the test specimen to the appropriate temperature inside a constant temperature air oven and determining the required characteristics with the specimen kept under the same temperature. For this purpose the equipment needed for conducting the determination can either be kept inside the oven along with the test specimen, or if this is not feasible because of certain constrains, by taken the heated specimen out from the oven and conduction the test in still air within the shortest possible span of time.

 

The Asian hot air Oven has a test chamber of double walled construction. The inner walls are made of stainless steel sheet and outer walls of CRCA sheet. The space between the two walls is filled with mineral wool for insulation. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on.

The oven is heated electrically with the help of heaters placed in ribs on the bottom and sides of the chamber. (An air circulating fan is provided on the back of the chamber for even temperature distribution) the temperature inside the test chamber is indicated and controlled by digital temperature controller.

The chamber is provided with two ports with adjustable openings for enabling natural change of air inside it by convection. These ports can also be used for providing electrical access to the test specimen kept inside the oven, if so desired.

Product Details:

The Asian abrasion tester for zipping made on a fabricated horizontal base plate. There is an arrangement for holding the test sample of zipping horizontally on a horizontal plane. The holding arrangements have metallic strips which clamp the test specimen with the help of four knurling nuts. There is an emery cloth of specified designation may be mounted on the horizontal platform below the test specimen.

Additional Information:

• Item Code: atedin
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Colour Matching Cabinets available with us offers standardized and environment for visual assessment of colors. These are ideal for applications requiring color consistency and quality. The cabinets offered by us facilitate the clients to evaluate color sample under various sources of light including artificial daylight, filament light, ultraviolet light and tube light TL 84 (triphosphor fluorescent light). With the use of multiple light sources, metamerism can be easily detected. The single light source should be used when the samples appear matchless.

 

Technical Specification:

 

• With TL84, TL96, CWL, ADL, UV, TFL Incra Light

 

Tensile testing machine (digital)

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.

 

The “ASIAN” Tensile Testing Machine provide a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton.

 

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.

 

Changing the belt in one or more sets of V pulley can change the speed of traverse of the lower grip. Different model have speeds suitable for testing different materials. An arrangement for moving the lower grip manually is also provided.

 

The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.

 

The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical. Which include micro-, switches, Push buttons, and contactors for safe and convenient operation.

Additional Information:

• Item Code: digitensile

Product Details:

The “ASIAN” Digital Thickness Gauge for paper consists of a dial micrometer (or digital micrometer) fitted on a rigid metallic frame .the micrometer has a flat circular indenter, Which exerts the specified pressure on the paper sample whose thickness is being measured through a dead weight .the paper sample is kept on an anvil, which is in from of a flat circular platform. The axis of the indenter and the anvil coincide and is the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the paper sample with the help of a lifting lever.

With the help of our distinguished professionals, we have been able to bring forth a commendable array of Tensile Testing Machines. These precision engineered machines are manufactured employing latest equipment and advanced technology following industry standards & norms. All our products are appropriate for testing tensile strength, compression and elongation of leather, wires, rubber, tubes, cables, plastic, conductors, plywood and metals. Moreover, we customize the offered range as per the specifications detailed by the patrons.

The “ASIAN” Tensile Testing Machine provide a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton.

 

The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips.

 

Changing the belt in one or more sets of V pulley can change the speed of traverse of the lower grip. Different model have speeds suitable for testing different materials.

 

The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.

 

The tester is finished in metallic painting and bright chrome| zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical. Which include micro-, switches, Push buttons, and contactors for safe and convenient operation.

 

TECHNICAL DATA

Range: 500 Kg with 0.1 kg least count digital display (other capacities also available)

Elongations: up to 900mm X 0.1 mm least count digital display

Traverse Speed: 100 & 300mm/min. (other traverse speeds are also available)

Motor: ½ Hp, 1425 rpm, 220 VAC single phase induction motor

Power required: 220 VAC, 500 W, single phase

 

Product Details:

Pilling Tester, mounting the test specimens onto the PU tubes and put them into the pilling box which has cork liner mounted on the 6 sides, rotating at a specified speed and direction, simulates the normal wear of fabrics. When specified counter has been finished, compare the tested specimens with reference photographs for assessment of pilling.

Features:

1. LCD display with unique program controller
2. Pilling or Snagging box: 2 box
3. Snagging Box:Optional

Product Details:

“ASIAN” Digital Light Fastness Tester is used for determining the Colour Fastness of textiles using on artificial light source.

PRINCIPLE:

A test specimen of the textile together with Blue Wool Standard is exposed under prescribed conditions to the light from an artificial light source. The colour fastness of the specimen is assessed by comparing its performance with that of blue wool fastness standards.

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Production Capacity: 20
• Delivery Time: 20 days

We manufacture different types of flammability tester,

• Vertical plane type
• Horizontal plane type
• Inclined plane type
• Toxicity type
• Geotextile flammability tester.

The “ASIAN” High Temperature High Pressure (HTHP) Beaker Dyeing Machine made of the double wall stainless steel tank in which the rotor is mounted. The rotor is supported by two wall bearings the rotor have different holes for the mounting of beakers. The rotor rotates with the help of the gearbox and motor. The timer controls the rotation time of the rotor. The stainless steel tank is leakage free. During test the tank filled with the glycerin and the heaters are mounted in the tank for giving the desired temperature.

 

The temperature is indicated and control with the help of the digital temperature indicator cum controller. All sides of the tank insulated with the help of the glass wool. There are the valves are mounted one for drain and the other for over flow of the glycerin in the tank. Twelve beakers, a spanner and one holding device also provided with the instrument as a standard accessories.

 

 

The “ASIAN” Air Permeability Tester for textiles consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen.

 

The test specimen is hold between two round-shaped grips. The grips are lined with rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism.

 

The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the digital manometer (or manometer tube) in terms of mm of water level & airflow is measured by the Rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

Additional Information:

• Item Code: Airper

The “ASIAN” Air Permeability Tester-high pressure for textiles consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and Vaccume gauge to measure the pressure drop between the faces of the test specimen.

 

The test specimen is hold between two round-shaped grips. The grips are lined with rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism.

 

The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the Vacuum pressure gauge in terms of mm of water level & airflow is measured by the Rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

The ASIAN Bursting Strength Tester is designed to find bursting strength of fabric/leather/paper/paper board. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.

 

The equipment is fitted with a motor driven cam mechanism, which increases fluid displacement on the lower side of the diaphragm at a specified rate. The equipment is fitted with an arrangement, which automatically brings down the pressure and stops the motor on completion of the test cycle. A maximum reading type digital pressure gauge gives the bursting pressure.

 

The equipment is raggedly designed to give a long & trouble free life. The components are brighter chrome plated or painted in metallic paint to give the tester an aesthetic appearance.

 

TECHNICAL DATA

Capacity : 35kg /cm²

Opening in upper clamp : 30.5 mm diameter

Opening in lower clamp : 38.1 mm diameter

Rate of fluid displacement : 95 cc/ minute

Test fluid : Glycerin

Gear Box : Worm reduction type

 

Launderometers offered by us comprise a digitally controlled, electrically heated double walled water bath. We use Al stainless steel in manufacturing the inside walls of the bath. Further, the outer walls are manufactured using mild CRCA sheet, which is duly enameled. The heater is used in order to heat the bath. This has a temperature controller device which is controls the temperature of water inside the bath. The temperature is displayed on a digital indicator. During test, the specimens and test solution are kept in stainless steel jars. Furthermore, the jars have rubber seals for avoiding water leakage.

 

Technical Specification:

 

• IS: 687 - 1979, IS: 3361 - 1979, IS: 764 – 1979, IS: 765 – 1979, IS: 3471 - 1979: Methods for determination of colorfastness of textile materials to washing: test 1, test 2, test 3, test 4 and test 5 respectively.